Erskine™ snow blowers have been proven for over 50 years by people who need to move snow fast after every snowfall or blizzard. They are tough, dependable, and Built To Go - Day After Day!

All Erskine™ snow blowers feature trouble-free chute rotation in all winter conditions. The Erskine™ chews through deep drifts
and clears to the bare ground. Please order early to assure that you will have your Erskine™ ready for the first winter storm.

Stop Looking Back...

and start

moving in the

right direction

NEW!

Overview

Erskine Attachments is excited to introduce it’s new, innovative line of snow blowers, the RP (rear pull) Series.  The 2-stage 3-point mounted pull-type snow blower, in conjunction with Deur Implement in Newayo, MI, has been in the design and testing stages for about the last 5 years.  With as many units out there blowing snow with great success and due to increasing demand, we decided to put the RP Series into regular production.

Why a rear pull-type snow blower?  

The obvious answer is that you don’t have to drive backwards, which is literally a pain in the neck, but also is not a very safe way to operate equipment.  While being more economical than a front mounted snow blower the RP (rear pull) still allows you to drive forward and gives you the option to leave the front loader on the tractor if so desired.  Most new compact tractors have front wheel assist, which allows the tractor to drive through gobs of snow.  The blower lifts very high with the 3-point, so when a very deep drift is encountered, the tractor can be turned around and backed into the drift to drag it out.   Also, it can be used on older model tractors with out ‘live’ PTO because you can clear the snow out of  the chute before stopping the tractor by simply raising the 3-point.  Of course the new RP series is a 2-stage blower, so it gathers snow just like the backups, thereby eliminating the main problem of the old single stage pull-type blower, bridging of snow across the front of the blower, which prevented it from feeding into the fan. All in all, the **NEW** Erskine™ Rear Pull snow blower just makes good sense and we are expecting it to be a big hit.

**NEW** Model 601RP	**NEW** Model 781RP	**NEW** Model 901RP

Features

	2 – stage system eliminates snow bridging common on the V-plow pull type snow blowers.
	Drive forward through the snow, stop looking back!
	Loader can be left on tractor!
	Live PTO is not required.  The blower can be lifted to clear the snow out of the chute while still moving forward.
	Enclosed auger drive chain eliminates nagging chain problems and increases chain and sprocket life dramatically.
	Adjustable skid shoes.
	Trouble free chute rotation system.
	Heavy duty gearbox and drive lines.
	Easily accessible auger drive shaft shear bolt.
	Engineered ‘Erskine Tough’ and offered in 3 widths to accommodate tractors up to 100 HP.
	Model 601RP is for tractors with 20 to 35 HP, is 60” wide and comes standard with hand crank chute rotation.  Orbit motor chute rotation is available by option.
	Model 781RP is for tractors with 30 to 60 HP, is 78” wide and comes standard with hand crank chute rotation.  Orbit motor chute rotation and hardened skid shoes are available by option.
	Model 901RP is for tractors with 50 to 100 HP, is 90” wide and comes standard with orbit motor chute rotation and hardened skid shoes.
	Hydraulic Orbit Motor Chute Rotation System

Specifications

1) Includes deflector and three position linkage.  Hydraulic or electrical is optional.

2) Hydraulic rotator is optional.

Pricing

**Manual Chute Rotation is standard on 601-RP & 781-RP.
** Additional shipping charges may apply. Call for details.

Front Mounts

Models starting at 20 HP on up and widths from 60" to 108". Call for more details

Skid Loader Mounts

Model ES2000 in action! 

         

The Model ES2000 is ruggedly built, while remaining economically priced, for skid steer loaders with of 11 to 25 GPM.  This snowblower, like the ES2400, is completely hydraulically driven with no chains, sprockets, or PTO shafts.  There are no shear pins, the fan and auger are protected by pressure relief valves.  The ES2000 has a solenoid activated hydraulic manifold that controls all functions from a single set of outlets on your skid steer loader.

Features

	Cutting height of 29"
	Auger is 16", open flight, and protected by an adjustable pressure relief valve on the snow blower.
	Fan is 4-blade, 20" diameter, and protected by the skid loader pressure relief system.
	270° Hydraulic Chute Rotator
	Casting Distance is up to 30 feet!
	Rated for 11 to 25 GPM (gallons per minute)
	Replaceable 3/8" x 3" bolt-on cutting edge.
	Skid Shoes are adjustable and replaceable.
	Hydraulic chute rotation and deflection, all from one set of auxiliary controls.
	Skid Shoes are adjustable and replaceable.

Specifications

Pricing

*Use on skid steer models equipped with factory attachment control system.

Model ES2400 in action!
         

The Model ES2400 is a true Industrial Snow Blower, built to meet the tough demands of skid steer loaders with 24 to 42 GPM.  This snowblower, like the ES2000, is completely hydraulically driven with no chains, sprockets, or PTO shafts.  There are no shear pins, the fan and auger are protected by pressure relief valves.  The ES2400 has a solenoid activated hydraulic manifold that controls all functions from a single set of outlets on your skid steer loader.

Features

	Cutting height of 36".
	Auger is 18", open flight, and protected by an adjustable pressure relief valve on the snow blower.
	Fan is 4-blade, 24" diameter, and protected by the skid loader pressure relief system.
	270° Hydraulic Chute Rotator.
	Casting Distance is up to 40 feet!
	Rated for 24 to 42 GPM (gallons per minute)
	Replaceable 1/2" x 4" bolt-on cutting edge.
	Skid Shoes are hardened, adjustable, and replaceable.
	Hydraulic chute rotation and deflection, all from one set of auxiliary controls.

Solenoid activated hydraulic manifold provides fingertip operation from your skid steer levers.

Skid Shoes are hardened, adjustable and replaceable.

Specifications

Pricing

*Use on skid steer models equipped with factory attachment control system.
* Truck loading chute option available